Enter
your email address for details of Galleon Products.
|
Synchronise
CCTV Systems using atomic radio-controlled clocks.
click
here for product list
The time
signal transmitted by the National Physics Laboratory is the most precise
time available, accurate to 1 second in 1,000,000 years. The Galleon range
of Atomic Radio Clocks uses the signal to synchronise the time recorded
on video surveillance equipment. Galleon ARC-Clocks can synchronise the
time on video sequencers, Digital Multiplexers, CCTV system or directly
onto the video signal before recording. The signal can be received up
to 1500 kilometres from either Rugby in the UK or Frankfurt in Germany.
Simple
Connections.
Simple connections.
Galleon Atomic Radio Clocks are easy to install and use. They interface
with either-
- Video
Sequencer/Multiplexer serial port and have driver software to set the
time on most video sequencers and multiplexers.
- Stamp
the time directly into the signal before the VCR, this uses a coax in
line time stamp
All kind
of organisations all over the world are already using Galleon Remote Atomic
Radio Clocks, more than 20,000 ARC-Clocks world-wide
Key benefits
include:
- Ensures
that the correct time is always recorded on tape.
- Automatically
adjusts between Summer/Winter Time. No need to remember to change your
clocks manually.
- Helps
combat fraud by providing accurate audit-able time-stamping
- Log exactly
when events occur.
- Set the
correct audit-able time on CCTV recorder.
- Over 20,000
GALLEON Atomic Radio Clocks installed and working.
- Full product
range, for all your Time Synchronisation requirements from Galleon The
Time Specialists.
- Automatic
update of time. No user intervention required, once installed forget
about it.
- Simple
Installation
- Reliable,
GALLEON Atomic Clocks are used by thousands of organisations world-wide.
They are used in a wide range of applications, including currency trading
and e-commerce.
Product
List : CCTV Time Synchronisation using ARC (Atomic Radio Time)
|
|
Stamp
the correct synchronised time onto a single VCR or monitor.
|
|
Description
|
Product
Code
|
|
Video
TimeStamper master. The TimeStamper for CCTV provides an
on-screen time and date display for CCTV systems and is connected
in-line just before the monitor or VCR. Works with coax systems.
Includes Atomic radio time receiver, VCR coax interface (input
and output), and a display for time, signal strength and date.
|
TSM/M
|
| Remote
Antenna for TimeStamper Master. The remote antenna adds the
ability to mount a receiving antenna up to 500 feet 150 meters
away from a TimeStamp master to improve the signal reception
in areas were there is a weak radio signal. The remote antenna
m can be mounted in a roof space or on a external wall. Unit
is sealed to IP65. |
TAD/RTA/M
|
Video
TimeStamper slave. The TimeStamper slave receives the
time from a TimeStamper master thus saving the cost of a
second Atomic radio Clock receiver. TimeStamper slave provides
an on-screen time and date display for CCTV systems and is
connected in-line just before the monitor or VCR and works
with coax systems.
|
TSS/M
|
|
Synchronise
time on CCTV Multiplexers
Tecton
(Drax)TimeController Synchronises the time on Tecton, Montage or
Vicon multiplexers. The TimeController provides a serial output
to synchronise the CCTV multiplexer once every hour, Includes Atomic
radio time receiver mains powered, serial interface, time, signal
strength and date display.
|
|
|
MontageTimeController
Synchronises the time on Tecton, Montage or Vicon multiplexers. The
TimeController provides a serial output to synchronise the
CCTV multiplexer once every hour, Includes Atomic radio time
receiver mains powered, serial interface, time, signal strength
and date display.
|
MUX/DTM/M
|
| ViconTimeController
Synchronises the time on Tecton, Montage or Vicon multiplexers. The
TimeController provides a serial output to synchronise the CCTV
multiplexer once every hour, Includes Atomic radio time receiver
mains powered, serial interface, time, signal strength and date
display. |
MUX/DTM/M
|
| BaxallTimeController
Synchronises the time on Baxall multiplexers. The TimeController
provides a serial output to synchronise the CCTV multiplexer
once every hour, Includes Atomic radio time receiver mains powered,
serial interface, time, signal strength and date display. |
MUX/DTM/M
|
| Remote
Antenna for Time Controller. The remote antenna adds the
ability to mount a receiving antenna up to 500 feet 150 meters
away from a TimeStamp master to improve the signal reception
in areas were there is a weak radio signal. The remote antenna
m can be mounted in a roof space or on a external wall. Unit
is sealed to IP65. |
TAD/RTA/M
|
All
prices are ex-works and exclude VAT - Delivery Charge of £10.00
per item.
|
CCTV Time
Synchronisation